Coating
Product series: YT-CT
High-performance PUD for wood & furniture finishes
Hard PUD grades that combine scratch and stain resistance with the clarity and weatherability premium wood finishes demand.
Hard PUD grades that combine scratch and stain resistance with the clarity and weatherability premium wood finishes demand.
Our coating-grade dispersions deliver high pencil hardness, excellent blocking resistance and good clarity for wood furniture, cabinetry and industrial wood protection — outperforming conventional acrylics in toughness.
High hardness and scratch resistance
Excellent hot-blocking resistance
Good clarity and leveling
Low VOC, waterborne systems
Clear and pigmented topcoats with high clarity and chemical resistance.
Tough films for traffic-wear and stain resistance on wood substrates.
Protective coats on doors, mouldings and engineered wood.
Layer build, clarity and blocking resistance depend on resin hardness and cure.
Substrate prepared; sealer fills grain and builds adhesion.
Stain or base coats build color and smooth the surface.
Hard PUD top layers deliver gloss, hardness and feel.
Air or forced dry; hot-block test before stacking and ship.
Substrate, sheen and chemical resistance narrow the YT-CT shortlist.
| Parameter | What to specify |
|---|---|
| Substrate | Solid wood, MDF, plywood |
| Sheen | Matte to high gloss |
| Hardness | Pencil hardness, scratch, blocking |
| Chemicals | Stain, hot coffee, household cleaners |
| System | 1K waterborne or hybrid with additives |
Representative YotoChem grades for this application — full TDS available on request.
Waterborne peelable PU resin for temporary protection of glass, metal, painted and plastic parts — excellent leveling, clean peel-off and yellowing resistance.
View grade →
Epoxy-modified anionic aromatic PUD with smooth film formation, high gloss and extensibility — heat, abrasion, water, corrosion and insulation resistance.
View grade →
Anionic aliphatic PUD with pencil hardness 1H–2H — excellent water, solvent and abrasion resistance with good adhesion to a wide range of substrates.
View grade →
Bio-based waterborne polyurethane for specialty top coats — clear, tough films with excellent wet/dry rub, cut, solvent and scratch resistance, and strong adhesion that enhances coating durability.
View grade →
Specialty anionic aliphatic PUD with excellent penetration, sand-binding and strong adhesion — solvent and water resistant primer resin for art coatings, wood primers, industrial paints and floor coatings.
View grade →
Anionic polycarbonate-based PUD with medium-hard glossy films — alcohol wipe resistance ≥50 cycles, good water and solvent resistance; for metal, plastic, glass and leather finishing.
View grade →
Anionic aliphatic waterborne polyurethane dispersion — non-toxic, high film hardness, deep blackness and excellent adhesion, with good solvent and water resistance.
View grade →
Specialty anionic aliphatic PUD with high gloss and pencil hardness up to 2H — excellent water and solvent resistance for wood topcoats, industrial paints and floor coatings on hard substrates.
View grade →
Anionic aliphatic waterborne polyurethane dispersion — non-toxic, high film hardness, excellent colour development and sanding performance, with good solvent and water resistance.
View grade →
Anionic aliphatic waterborne polyurethane dispersion — non-toxic, high film hardness with good film formation and gloss, adhesion to many substrates and outstanding water resistance.
View grade →
Waterborne anionic aliphatic polyurethane dispersion — eco-friendly emulsion with good mechanical properties; smooth, transparent, high-gloss films that are light-fast and yellowing-resistant; used for metal surface protective coatings with high hardness, water/solvent/abrasion resistance, anti-corrosion and insulation; good adhesion on PVC and PET.
View grade →
Anionic aliphatic PUD with smooth, scratch- and abrasion-resistant films (HB hardness) — eco-compliant protective coating for metal, glass and wood surfaces.
View grade →
Anionic aliphatic waterborne polyurethane dispersion — eco-friendly and non-toxic, high film hardness (1H–2H) with low-temperature film formation, excellent solvent, water and abrasion resistance, good adhesion to a wide range of substrates; widely used in coatings demanding high film hardness, for one-component cosmetics (nail polish), waterborne wood, metal, plastic and glass coatings.
View grade →
Anionic polycarbonate-based PUD with film pencil hardness up to 2H — excellent scratch, abrasion, water and solvent resistance, good low-temperature film formation, transparent and high-gloss.
View grade →Our coating-grade PUD typically offers better toughness and hot-blocking than conventional acrylics at similar gloss — we recommend panel tests on your substrate.
Some grades work across layers; for premium furniture we often pair a flexible sealer with a harder topcoat — share your layer structure.
Yes — self-matting and compatible matting agents are available; specify target gloss and clarity.
Room-temperature or low-temperature forced air; full properties develop over 7–14 days depending on formulation and humidity.
Describe your substrate, sheen level and performance spec — we'll recommend YT-CT or related grades.
